1. The first check bit "Micro Cooling Fan" position of work, and the fan work necessary parameters and fan type, etc.,
2. Jog motor commissioning Check the direction of rotation direction of the fan rotor and fan nameplate are the same, if not, the need to cut off power supply in case of power supply line of any two swap position after re-commissioning.
3. Before use, carefully read this manual and the clear fan of the various requirements and working conditions.
4. Carefully check the electrical system is intact. The wiring is correct, whether the transport connection vibrating loose, virtual access situation.
5. "Micro Cooling Fan" Have motor damp, after turning on, that the motor rotation direction is specified.
6. Test fan operation must be stable, adequate lubrication. Fan bearing housing vibration and temperature to meet the requirements, you can start using.
7. A tool or any other items not on the main bearing housing position, ensure that equipment around tools and other items should be stored in order to maintain good relations and unobstructed.
8. careful observation "Micro Cooling Fan" Installation and preparation work is not done to determine the position, and that if there are any that do not meet the specifications of the installation situation must be resolved promptly, otherwise the fan in use, it is prone to all a wide variety of issues.